The_AntiPirate
Member
- Joined
- September 28, 2008
- Messages
- 27
- Reaction score
- 0
- City, State
- Rhode Island, in the rust belt :(
- Year, Model & Trim Level
- 2003 Explorer Sport Trac
So I blew a front brake line recently and after changing the busted steel line I go to bleed the brakes. I loosen up the bleeders on the rear drums in preparation, 7mm bleeders, interesting. Move on the front bleeders and I cannot find the right size for these friggin things. 9mm is too small, 10mm is too big, 3/8s is almost right but just big enough to spin as soon as I put pressure on it, 7/16s is too big. What size are my bleeders? I've tried every socket and wrench in my garage and nothing fits.