Search results

ok i have a little update 2 days ago i was trying to clean the mass air flow i unhooked the battery reset the codes in the computer i was messing with the 4x4 i put it in 4 high back out it worked but when i put it in 4 low the lights started blinking went to run to the store and it sounded...

i have a 98 ford explorer the 4 low and 4 high lite keeps blinking every few mins while driving when i try to put it in to 4 low and 4 high it does nothing no click or clunk no sound at all when i turn the switch to 4 low and 4 high if i unhook the battery the lite will not blink for a month or...

i have a 95 ford explorer xlt 4 door with ele overdrive and 4x4 here is my trouble when i bought i could not put in to drive and just go if i put it in 1-D it will not move it will try to go but dont go it makes a clicking sound i have to put it 2nd to take off when i get put to about 25-30 i...

well i dont know about low QUALITY but i only paid 40.00 for it and im on kind of a fixed income im getting unemployment so i had to go with some thing cheap and the guy is holding a 15" pyle sub for me i told him i didnt have money for both the amp and the sub he only wants 40.00 for the sub...

ok i was haveing amp issue but i fixed that i took out the sony 600 watt 4 ch and i got a use amp from cregslist it is a pyle chopper 1800 watt the guy that sold it to me told me i should get a capacitor but i dont know what size or any thing about them now im running a dual voice coil...

ok thank u because i dont know much about it i had a setup in a pickup but it was two 10" Pyramids with a rampage 500 watt 2 ch amp had to sell i just hooked it up this sub is alot diff than the 2 i had they was single coil and the one i have now is a dual voice coil big diff

what would be a good watt amp and what kind would be good under 50 dallors and i can not use ebay i have no bank acount i only have debt cards i look on this site http://www.deffaudio.com but i dont know what to buy and not to buy

i have one Audiobahn 10" sub and a 4 ch sony explode amp 600 watt amp bridged 2 channels that comes out to 110 watts at two channels they say u can not bridge all 4 channels

i only have 2 rca jacks so i can only run the front or the back i have tryed the front and the back the same thing real low thats why im thinking i need a new amp

i bridged the two voice coils like some one on here told me for one sub at a 2 ohm set up and we tryed running one voice coil to one ch and the other coil two another channel and it made no diff im thinking he might have messed up the amp before i got from him not sure how to test it

i have tryed every diff way and no diff im going to get a friend to test the sub on his amp and see if it is the sub or the amp

the sub im not sure it has flames on the back and says 350watts and the amp is a xm554zr sony explode

i tryed ebay but i can not do the pay pal thing because i dont have a bank acount plus im kinda on a fixed income i get unemployment i just bought this set up for 70 dallors cash from a freind i did because he has no income so i helped out a friend

and if the sub is rated at 350 watts and im only putting 110 watts i think thats way to low and i bridged the sub to 2 ohms

my 4 door speaker over power the sub

i turn it all the way up and after a few mins the amp is some what warm

i just bought a dual voice coil Audiobahn 10" sub and a 4 ch sony explode amp 600 watt amp bridged 2 channels but i get very little bass out of the sub im thinking the amp is not big enough i checked the watts per channel 55x4 i bridged 2 channels that only comes out to 110 watts the amp is...

4wd-- like said i can drive it but it will not take off from a dead stop like a red light inless i take off in 2nd gear then put it up in drive it a auto tranny but i have to shift it like a stick been like that when i bought it i have been driving it like that for 2 years the 4wd works good im...

when i put mine in 1st gear or drive it makes a loud clicking sound i have to use 2nd gear to take off then put it in drive at about 25 or 30 mph will not go in drive it will click and not move trys to but will not go im thinking band broke not sure any one know why

thank u i will look at it tommrow if it still dont work im thinking it will be time to shop around for a new amp

the guy that hooked it up run a wire from one side of the sub to the other to bridge the sub then run 2 speaker wires out to the amp i only have 2 rca plugs so we bridged the rear 2 channels one wire when on the + of one ch and - on the other ch he dont know why its not working right because he...

'amp and sub question' we bridged the coils on the sub then put one sub wire on the - on the amp and the other wire on the +

95 explorer when i put mine in 1st gear or drive it makes a loud clicking sound i have to use 2nd gear to take off then put it in drive at about 25 or 30 mph will not go in drive it will click and not move trys to but will not go im thinking band broke not sure any one know why

i just bought a dual voice coil audiobon 10" sub and a 4 ch sony explode xm554zr amp 600 watt amp bridged 2 channels but i get very little bass out of the sub i dont know what to i never messed with a 4 ch amp before is there anything i can do to make it work or do i need a 2 ch amp i dont know...

ok i will have to try i will have get another one because i got mad and just took the cd player and the plugs back to walmart