Search results

having the same problem, what did u do to fix it.

I have a 97 v8 auto 4 door explorer awd that i would like to change to a select-able tcase what can i use,also is there a good reference point to mount radius arm brackets for a sas conversion i have all the parts just need some hints.radius arms are stock length.

I have a dana 44 from a 1978 bronco that is narrowed but it needs parts knuckles out both side, I have a 78 3/4 chevy 8 lug in the yard would the knuckle out fit my ford,and what t case would i need to turn my awd 5.0 explorer into a shiftable 4x4. any help would be great.

Need to know steering box ideas for my 97 v8 explorer awd 4 door sas could I use a 89 ranger one. any help or pics would be great. it the last thing I need to complete the swap.:D

hi, just bought a 1997 explorer v8 awd and would like to start a dana 44 coil spring swap, I have done one on a bronco 2 and just used the transmission mount as a radius arm mount locater so everything would line up good.My question is, is there a spot on the explorer to use as a good locater...

would a 3.55 rear ratio axle work with a 3.50 front ratio :confused:

just finished my sas but i have lift blocks for the rear, the question is the truck came with a block on top of the axle from factory ,can i but the block on top or not.the block is a 5 inches:confused:

I have a 8.8 rear axle with a 3.55 gear ratio and a dana 30 with a 3.50 will this setup work, not sure if they have to be the same.:confused:

Just wondering what the best donor truck to find for a set of Dana 60s Ford. like model/year:confused:

Need some help with a couple of Hemi joint questions, I want to put extension on my radius arms for my dana 44 sas and i would like hemi joints on the end. the question is how do i know what size of hemi joint to buy. (new to the hemi joint thing) and what size for steering and where to...

Thanks for your Help

is there any good pics of want I need my panhard bar and steering to look like

http://www.uploadgeek.com/uploads456/0/2154703_2_full.jpg i dont know if i did it right, but the axle is my old dana 30 but the steering is the same on my dana 44

I could post pic, but I not sure how to do it.

whats the best way to fix ( steering shock )

Just took my sas bronco 2 for the first ride:D but i have one problem the truck drives great and straight until i let off the gas then it will dart off to the passenger side. I check all bolts,bushings are new and suspension parts look good. any help would be great.

its the small bearing in front of the pinion gear( i think its called a pilot bearing) not the 2 pinion bearings, the axle came out of a 1966 bronco and i was told it was a 9 inch and as far as i can tell from pictures it looks like a 9 inch except that bearing.

I have a problem with parts for my 9 inch, the pilot bearing that comes in the kit to install the ring and pinion is a different size, (bigger) ive tried 3 kits and the same thing.can some one help, or do i have a different axle.:confused:

:)Thanks for the help, I think Iam going to space out the mounts. also do u know how to post pictures on the site, i would like to put my bronco 2 build on it.

Iam changing my dana 44 to full width, I spaced out the coil buckets 2 inches on each side but the radius arms are to far away from the frame to mount them, I heard of some people bending the radius arms in towards the frame, what is the best way to bend them with out snaping them, any help...

what rims are everyone useing on fullwidth 44 swap and 9 inch (backspacing/offset

looking for a good web site on how to rebuild a track loc 9 inch have all new parts clutches etc but no instructions just need to know how many shims to put in behind clutches.:confused:

I have an 1966 ford bronco 28 spline 9 inch rear end in my 86 bronco 2, question is can i put a 3 member with 31 spline in that housing and just change axles to match, :confused:

question mini spool dana 44 front axle good idea or not,i was given the axle not sure if i should leave the spool in or not.

I want to change gears in my dana 44 and 9 inch from 3.50 to 4.88 or 5.13 is there any thing i need to know other than ordering gears, some one told me i need a new carrier for the dana 44. any help would be great