Project thread: “Beast”

[410Fortune]

Did you know the eatc needs to be reset each time there is an issue with the blend door motor.
It will stop trying to move the motor. So you swap in a new one it won’t move…. Until you do a full reset
It also has a self test mode

 

[TribeZ]

Did you know the eatc needs to be reset each time there is an issue with the blend door motor.
It will stop trying to move the motor. So you swap in a new one it won’t move…. Until you do a full reset
It also has a self test mode

My original unit wouldn’t reset, I held the off and floor then pressed max a/c. But all it does is display a few numbers 01/03/06/03 I had found the threads with the whole procedure for the reset / diagnostic mode.

Then it would not let me do the test or anything it would exit diagnostic mode on its own. My eatc has been acting up a while I think. I kept the old one, I read you can rebuild them.