Search results

Sorry to revive this thread, but I realized I should clarify my response on here. I've found, that many aftermarket LED lamps light on explorers when installed in reverse. I'm not sure if it is because the way the lamps are wired is to make them compatible with C/K and standard sockets, or if...

It sounds like you have one or both of your LEDs installed backwards. They are diodes, which means power will only flow through them in one direction. Otherwise, do you have one of those light up hitch covers or those lights for the bottom of your tailgate? Those may also cause issues.

I took a bunch of pictures from the drivers seat, but only one of my Explorer during my road trip to Kentucky last weekend. Anywhere, here you go EF. Side note, I passed a guy towing a nice looking 2nd gen set up pre-runner style in Illinois or Indiana I think... I can't remember, I drove...

Just had a 1900 mile road trip in mine. It's $2.49 at home, I paid $2.59 in Iowa, $2.59 in Indiana, $2.62 in Kentucky, $2.59 in Missouri. Not all that expensive really for the trip

Man, your gas prices blow. $2.39 a gallon here, it's been pretty stable lately too, though I think it was slightly higher a week or two ago, $2.47 maybe?

Here's the way I see it. It's terrible what happened to that guy. But... There were a group of people who wanted a change. They peacefully protested, and should be listened to and answered. That's the way this country works. You have a legitimate grievance, you are free to speak about your...

What I got from the story is that they didn't attack him because he notified then before he entered restricted airspace and they didn't want to shoot down a civilian aircraft when they could arrest him upon touchdown. Plus, honestly, a terrorist could do about as much damage in an ultralight as...

I'm torn... On the one hand, I've got a lot of respect for the guy because he did something this ballsy and he was fully committed to making a non-violent statement. Plus, I can agree with his message... I'm really not looking forward to another multi-billion dollar campaign season. On the...

220k miles on mine, and it's still as good as new. They are the best auto tranny you can get in an Explorer.

I guess I don't know enough about the wiring in a third gen to be of much more help over the forum. You should get an audible tone any time a door is opened with the key in the run position, and any time the driver's door is open with the key in the ignition. I guess it would help if a member...

Ford door switches are notoriously bad. It's probably in one of your rear doors. Open the door, pull off the door panel, and unplug the little harness that goes to your latch assembly. When your warning lamp and lights go off, that's the door with the bad switch. The switches are like 15 or...

If you still had incandescent lights in, the LEDs could have been lighting through the grounds. There could be other issues of course that are causing your particular problem of course. But, the most common issue is not observing the correct polarity for the lights.

You have your lights installed backwards. Take them out of the bulb holders, flip the light bulb around, and re-install. LEDs are a diode and are made to only allow current to flow in one direction. What is happening is that your contacts on your bulbs are in the wrong position, so you are...

I use the Raybestos professional grade metallic and they are perfect in my humble opinion. Very quiet and they seem to have a pretty long life.

Was there a reason for not using the big cap on your dizzy with the HEI style posts, or did you just use what came with the pertronix unit you picked up? Also, I'm a bit confused since you posted a pic of wiring with the HEI 4 pin module and the wiring for the TFI, but you did use TFI since you...

No, you're fine just to unbolt it. The only thing that should be plugged into the seat is the harness for power seats if your vehicle is equipped with them.

I've seen that there are some compressed air only cars in places like India, and I've seen some homemade/made by engineering programs at universities compressed air cars. Honestly, I think they're a good thing. I'd really like to see these kinds of tHings on the road.

You aren't burning water... You need to split the water molecules into hydrogen and oxygen. This requires electricity for electrolysis. The electricity comes from burning gasoline. This means your alternator has to generate more electricity, which means more drag on your engine. Therefore...

I've been considering an HID retrofit for my 99... Those square ones look like they'd look pretty good in 2nd gen housings.

That is a really great looking Explorer. You've got some really amazing places to play up there too.

Wait 2mph off at what speed? The difference in your speedo between a brand new set of tires and an old set of tires can be op to 2mph at highway speeds depending on the tires you are running. So it's not that far off if you are talking 65mph and nothing you'd be able to correct with a...

I was restoring an old Wagoneer... but I traded it to a guy for a Goldwing. The Explorer has stayed my DD, but now that my health is improving and I don't have a Jeep distracting me, I might start playing with the sploder again. I cracked the bumper cover a few months back, so I feel kind of...

Ah yeah, you're correct. Sorry, I forgot about that, I've been mired in a jeep project for the last year.

The control arm kit is mostly a convenience but is also used in the case you damage your control arm. If you can just replace the bushing and balljoint yourself, then you'll notice no difference between using the old control arm and the new. It is quite a bit of work to replace the bushings...

The easiest way to post pics is to get a photobucket account. You can upload your pics there, and it will provide you links to post your photos on here. Use the img links they provide and your photos will be visible from your thread. Otherwise, if you have them posted elsewhere online, copy...