Search results

That was the trick! Turned out that I had a short in my trailer wiring harness. Got that fixed, replaced the fuse, and now it works like a champ! Thanks for the help!

Ok. The shift lever will not come out of park. I know it is not the tranny. I disconnected the shift cable underneath to check. When my Ex is NOT running...if I slowly move the ignition switch while trying to shift...it will move fine, if I hit JUST the right spot. I have checked the two torx...

The ramps lift the front up about 7-8 inches. I know VERY little about transmissions! This process is making me VERY nervous! It wouldn't be so bad if I had another vehicle to get back and forth to work with! I checked the WIT site and I am not sure how grooves my servo has. I may wait until a...

Who knows! I think I will try and replace that low/reverse servo while I am at it. I saw that the car needs to be level while installing this. My truck is sitting on 31.5 tires with warrior shackles. It is sitting on some ramps right now. Think it would be ok to replace this servo as it sits, or...

Get this! The guy at the local transmission shop says..."Take those gaskets...and pitch em! You don't need them!" Yeah...ok. Fortunately, there is a local WIT Transmission Parts store here in Indy! They have the gaskets for less than 5 bucks. When I told the guy at WIT what the guy at the tranny...

Thanks! I am going to try going at it again today. Just hope I can find someone with some gaskets around here. I guess it just boogles my mind that when I take it apart, there are no gaskets and it comes apart very easily. But to get it running again, gaskets are needed. Maybe if I can't find...

What are the torque specs? There were no gasgets at all. Just the valve body, metal plate, and the tranny. It would go into 1st when reverse wasn't working.

I had all gears earlier today. Sometimes reverse was a little slow engaging from time to time. Usually when cold. No torque wrench on the valve body. I did my best to get it as close as I could guess at it. I have one, but I didn't have the measurements. Also, does anyone have a link they can...

Ok...so I decide to do a tranny fluid and filter swap today. I have been having some issues with getting in reverse. At first I thought this might help, but I now know that I need to test my solenoids. Anyways...I drop the pan, remove the valve body, clean everything thoughly, and very carefully...

Good show! Picked up some good rims there! I was a little surprised that I saw about every make and model there....except for an Explorer!

I'm getting excited for the show this weekend! Time to pick up some new rims! I'm hoping to score a few other good deals as well. Should be some good buys there! Btw...is anyone alive in this forum?! LOL!

I would....pending price and pics!

I live on the west side of Indy. Maybe we should pick a weekend and hit Badlands? Never been, but I've heard good things about it and it sounds like a lot of fun!

I was needing to replace the rear diff fluid in my 95 4wd Explorer. It is starting to get a loud So I took it to two different shops to be serviced. Both shops gave me the same answer. The check/fill plug is completely rusted and either shop could get it loose. Also, either shop wanted to try...

I had the same problem in my 95. Take the door apart. Clean the glass. Clean out the 2 channels. Fill the channels with clear silicone. Place the glass in the track and push it all of the way up. Once it is up, raise the window track up allowing the silicone to surround the glass. Leave the...

Did you get this fixed? I have the same problem with mine. Where did you get the parts? What did they cost?