Muleman36
Active Member
- Joined
- August 9, 2021
- Messages
- 56
- Reaction score
- 24
- City, State
- Muleman36
- Year, Model & Trim Level
- 1997 5.0 XLT
Hi All. I've been reading every thread I can find and planning for a couple years. I finally was able to get a 4406 swapped into my 97. Trouble is, I don't know how to get the speedo to work again.
My 97 had a Speedo Gear in the AWD case. So, I was careful to make sure to purchase a 4406 case with a Speedo pickup in the tail housing.
However, the 4406 case I have has a magnetic (tone ring) style sensor. Is there a way to make this work with my rig? The plug is the same(wire was short, but I already remedied that).
My 97 had a Speedo Gear in the AWD case. So, I was careful to make sure to purchase a 4406 case with a Speedo pickup in the tail housing.
However, the 4406 case I have has a magnetic (tone ring) style sensor. Is there a way to make this work with my rig? The plug is the same(wire was short, but I already remedied that).