Front Camber caster adjustment

[Justin J]

Anyone knows how we can DIY and adjust the front camber/caster on this generation of Explorer? It’s messed up after Upper Control Arm was replaced. Thanks!

 

[Bazz270]

Release the bolts and move the UCA in and out to reach the desired camber / caster specs.then ,adjust the toe

 

[Trainmaster]

If you used Motorcraft replacements, you can line up the marks in the rust from the old bolts and you should be pretty well lined up. If you used some Chinese replacement, good luck.

 

[Justin J]

Thanks! Seems there’s no kit for this generation (like those for the previous generations of FE) that can facilitate this process.