Alright, I finally broke down and did it. I got all the parts pretty much rounded up, the axle is almost prepared and it will probably find its way under my truck in the next few weeks. Here is the specs:
HP Dana 44 out of a 76 F150 Cut down 6"
5.5 Wild Horses Springs
Full height (no chopping down for me) 80 F100 Coil Buckets
4.56 Gears
Rod End Steering courtesy of Rock Ware
I am going to attempt to use a stock TJ rear Track bar
Fabbed Trackbar mount
Fabbed upper Shock Mounts w/ Some Hoops
New Brakes, Ball Joints, Calipers, Wheel Bearings, Seals
Warn Premium Hubs
Things I want, but are out of the budget until I can sell my Lift and rims
35" BFGs
5 on 5.5 Black Rock Crawlers
Performance Wheel Spacers/ Adapters
Rod End Trackbar
HP Dana 44 out of a 76 F150 Cut down 6"
5.5 Wild Horses Springs
Full height (no chopping down for me) 80 F100 Coil Buckets
4.56 Gears
Rod End Steering courtesy of Rock Ware
I am going to attempt to use a stock TJ rear Track bar
Fabbed Trackbar mount
Fabbed upper Shock Mounts w/ Some Hoops
New Brakes, Ball Joints, Calipers, Wheel Bearings, Seals
Warn Premium Hubs
Things I want, but are out of the budget until I can sell my Lift and rims
35" BFGs
5 on 5.5 Black Rock Crawlers
Performance Wheel Spacers/ Adapters
Rod End Trackbar