salo
Member
- Joined
- May 10, 2009
- Messages
- 22
- Reaction score
- 0
- City, State
- winnipeg, MB
- Year, Model & Trim Level
- 95 RANGER XL
i am currently trying to swap the transmission on my 1995 ranger, it is a 2.3 with the 4r44e and im swapping it with one from a 98 3.0 i got the transmission out and noticed that the bellhousings are different so i switched them, then i swapped the neutral safty sensor and as i was looking at it i noticed that the 95 has another sensor on the tail side of the transmission and the one from the 98 doesnt. i done some research and i found out that it is the speed sensor. so i guess my question is do i have to swap the tail side of the tranny too or is there another way