fuel pump

Ok, so a bit of a long story, so bear with me! A few days ago I go out to my Ex try to start it up... get a nice cranking, but she just won't fire up. Tried to get a jump, and still no go. So I get it towed to my mechanic, and after 2 plus hours of trouble shooting they get it started. At...

OK so I have had my on going battle with my codes, low fuel pressure etc. Determined there was a problem with the new fuel pump. Turns out there was, had difficulties removing it but finally did and last night I got th elast of the parts I neede and was putting everything back together. So...

I have a 94 explorer i just removed the ac out of it, and now for some reason it won't start, i've checked all apparent vaccum lines and the grounds on the fenders. i replaced the ecm relay, checked fuses, checked fuel pump shut off switch it seems like i'm getting fuel pressure. The wierdest...

By now most of you know the back story... 6 5.0 10 psi at the rail (should be 30-45). On a whim I called Autozone to get a new fuel pump again since the tank was down and it had a 1 year warranty on it. In talking witht he guy onthe phone I mentioned I wanted the whole housing this time...

Back Story: 171, 174 (lean bank 1 and 2) and 401 codes (low voltage EGR) Last weekend spent the weekend removing the upper intake manifold and took off the EGR. Din't look to bad but cleaned it up and replaced the gasket onthe EGR and upper intake manifold. Started it up... no change. Bad...

Finally bit the bullet and decided to drop the tank and pull out the fuel pump yesterday. 96 5.0 awd After struggling to get the tank down a few inches I found the clips connecting the fuel line to the top of the fuel pump the "special tool" I had was too big (thats what she said ;0)~) so I...

I'm fixing up 1991 ford explorer. The fuel filter was so bad it would not stay running, I replaced it. Now its very hard starting. When cold & starting you have to turn key & pump the gas pedal continously 15-45 sec. before it starts. Like it doesn't hold pressure in the fuel line. Aslo when it...

Hi, Yesterday, after running smooth over 400 miles, on the last coffee break of the drive my Explorer decided it wasn't going to start. The engine began by running with extremely low revs (burbling?) and there was no response from the accelerator. The engine would then cut out a few seconds...

I have read many blogs on this subject and maybe someone here can help. I have a 2000 explorer with a 4.0 SOHC engine with 174000 miles on it. In the last year I have had a new computer, new MAF, new O2 Sensors, new head gaskets and the idle control replaced. (Cannot remember the name). I...

Well, first just want to thank everyone on this site who helps answer questions. Ok so the other day my truck just died while I was going down the road at about 50 in heavy traffic. Not good, I managed to pull off and push it into a parking lot to try and figure things out. My fuel pump wasnt...

Hey all, I was out wheeling at night and all was good. Once we got back on the pavement I tried pushing on the gas to accelerate up to speed (55mph) and it wouldn't do it. I pushed harder on the gas, and the engine's RPMs didn't respond at all. Didn't notice ANY problems on the "trails", but as...

After getting frustrated with my HHO experiments :banghead: I did some research and found out that any combustion engine can be converted to run on propane. I did a crude test to see if it would work on my 1994 Explorer. I used a mini propane bottle hooked up to the vacuum plenum and pulled the...

Out of nowhere, my 94 Limited died on me a few weeks ago. It was running fine, I pulled into a store, 5 minutes later I came out, put the key in to start, cranked it - and nothing. I cranked it again, hoofed the gas, and it ALMOST caught - stumbled, then quit again, exactly as if I had run out...

My '95 XLT , 2WD, recently died, luckily in my driveway. I had just changed a brake rotor and went to move the truck and it didnt start. Actually made me chuckle: Change brake rotor = kill truck. :scratch: ;) Obviously the two were not connected. So using all the great info from this site...