Search results

nice mustang, but the guy is nuts!!media2.big-boys.com/crazydriver1.wmv

look for the axle code on inside of drivers door on donor vwhicle, you are missing some numbers, chances are 3.27 open carrier, from the 7 across, at the 8's there should have been a raised dot meaning 8.8, the rest of numbers not sure about.

wow, not bad for a bunch of us rednecks running around a track :rolleyes: :D

just like any other sport you have to pick a team, or driver to follow, it can be addicting just like any other sports, nothing better to me than watching 600 horse race cars run around a track at 150 miles per hour, theres also the wipe outs, fist fights, politics and everything else to keep...

would like to know how it turns out, I have always just replaced the whole hing which is a royal pain in the rear for the top one, didn't know pins were available

Just starting having a problem starting my explorer, 3 times today it would turn over but no start, each time I reset the key several times till I heard the fuel pump running then it would start fine. could this be a relay sticking? It happened once before, and there was a different fuel pump in...

same here. Sterling Marlin might sneek up in there, for a while anyway :rolleyes:

if you are replacing, remove the panel under the carpet near center console area, this is alot easier than trying to squeeze your hands in between the cat, and the tranny, it is held in place with one bolt

speedo cable dry? try lubing it, disconnect at the gauge panel, and spray some teflon grease down it, may smooth it out

just went thru this myself, sounds like time to replace the sending unit, or when they replaced pump they did not secure the sending unit wire, may have come off, either way tank has to come back down, it took me all saturday to replace my pump and sending unit, good luck.

for othewrs with difficulty seperating ball joints, or tie rods, easiest way is to hit the side of knickle with a 2 to 3 pound hammer, the shock releases the wedge. For half shafts, the inner side with the clip is what holds it in, sometimes a lite tap will get it to go in, other times a little...

shows estimated delivery date of 2-14-05, Monday

Okay, I'm game, what is the difference? Not to be difficult but to me a spindle is a spindle, it attaches the same way, only difference is control arms as opposed to beams. I wasn't sure about the lift spindles, I know at one time I had seen them, but that was years ago.

Heres from my experience in Novato, for the citations your screwed, Marin county is a tough place for that. I actually got pulled over when the cop thought I was driving on suspended license only to find I was being towed, he pulled up behind me with blue lights and all, if you could only see...

Thats funny, I am from Novato, where were you wheeling? The cops there used to love chasing me around, that's one reason I am no longer there :eek:

that is too funny, I wonder if the nasa engineers have seen this

good one :D

We found out on both of ours, the first time I was hoping for a boy, which is what we got, second one my wife was hoping for a girl, and that's what we got, niether one of us could have taken the suspense. Both delivered in less than an hour, guess they couldn't wait either :eek:

I live in Jackson Tn, not a huge city but has alot of history, of course home to Carl Perkins who wrote "blue suede shoes", also home to the casey jones train museum. For us our home was built in 1906 by the Bemis company, and had electricity before others did, these here ran of a generater...

summer town? my wife cousin knows the people that run it, he is into building buggies down in Hohenwald

The 91-94 explorers came with a 9 bladed fan, Fords replacement is a 10 bladed, they know they needed more cooling, also check yours for cracks, I had to replace mine, looked like it was getting ready to come apart. Secondly, if you have not changed the fan clutch, for every year old they loose...

Is yours brown?, I live in Jackson and thought I was the only one around here in to explorers. I did see one a few months back, maybe yours on south side.

for the cost, bent beams from somewhere like camburg would be better, look over on the rangerstation, probably easier to get 2 wheel drive help there.

super good guy to deal with, definitely knows his stuff.

bumped this for others to find part number easier.